Reading Heating and Plumbing

Serving Reading for 15 years 0118 449 2155

"Your local Plumber" Text or Call Michael Knight 24/7 07760 547 999

"Your local Plumber" Text or Call Michael Knight 24/7 07760 547 999

"Your local Plumber" Text or Call Michael Knight 24/7 07760 547 999 "Your local Plumber" Text or Call Michael Knight 24/7 07760 547 999 "Your local Plumber" Text or Call Michael Knight 24/7 07760 547 999
Plumbers in Reading, what we do

Reading Heating and Plumbing

Covering Berkshire and Hampshire - Reading based local company established 60 years - No Call Out Charge - 100% Satisfaction Rate - Gas Safe Registered - Call Now 0118 911 3 999

Plumbing and Heating Service in Reading Berkshire

Plumber in Reading, No job too small...Call now (24hrs) 0118 911 3 999

Plumbers in Reading is a well established Plumbing and Heating company in Reading that has built up an enviable reputation over the last 10 years for quality, honesty, reliability and trustworthiness.

We are based in Reading and cover Lower earley, Winnersh, Wokingham , Woodly, Sindlesham , Caversham , Coley Park , Southcote, Calcot, Tilehurst, Theale, Pangbourne, Tidmarsh, Burghfield and all surroundings areas.

We are fully committed to providing a professional, speedy, honest service at all times whilst maintaining the highest quality of workmanship.   

  • Plumbing
  • Heating
  • Boilers
  • Scheduled work
  • Emergency call outs
  • New Installations
  • Repairs
  • Maintenance & Servicing 
  • Bathroom & Kitchen design and Installation

Reasons to Use Plumbers in Reading

  • No call out charge
  • No charge if we can't complete the job
  • Local Based in Reading
  • Trusted members of Checkatrade, My Builder, Rated People, Trustatrader
  • Gas Safe registered engineers
  • Plumbing and Heating engineers trained and qualified to the highest standards
  • 1 hour emergency response time
  • All work guaranteed for 12 months
  • Card payments taken
  • Clean and smart, fully uniformed engineers
  • Fully Insured

Call (24hrs) 0118 911 3 999

Free 0800 999 1233


Plumbing and Heating in Reading

Plumbing service in Reading


Plumbers in Reading

Calling a plumber for the first time because you’ve woken up to no hot water or have discovered a nasty water leak can feel a little daunting, especially if you have not had to do this before. 

999 Plumber Reading have put together a handy guide to help put your mind at ease when calling a plumber for the first time:
What should you do?

  1. If you’re calling a professional because of an Plumbing emergency in Reading, we recommend writing down as much information as possible about the problem. This will help you remember everything that may be important when speaking to your plumber and also give your plumber a better understanding of the issue and what work needs to be carried out.
  2. If you’re enquiring about something non-urgent, i.e. looking to upgrade your boiler or need some general advice, it would be useful to carry out some research of your own in advance. Holding some initial knowledge of your enquiry will ensure a better result overall and help keep the conversation crystal clear.

What should your plumber do?

  1. A reputable plumber should always be able to explain the options available in an easy to understand language. You should never be afraid to ask questions if you’re unsure about the services they offer, as they will be more than happy to explain things in further detail.
  2. Choosing a plumber you wish to work with will take your careful consideration, therefore you should never feel rushed into making a decision.  Your engineer will provide you with the information you need to make your decision and leave contact details for you to get back to them.
  3. When it comes to the price of your job, a good plumber will always be able to give you an estimate of the price and timescale. They will usually be able to tell you their hourly rates, however, this will not be an exact figure without really seeing what they have to work on.
  4. 999 Plumber Reading understand that you may need time to discuss the job with a partner or friend before coming to a decision. They will be happy to talk through anything else you think of and the available dates to start the job before you agree to sign them up.

Here at 999 Plumber Reading, we always act in a friendly, reliable and professional manner and are always happy to ensure you understand exactly what you need. If you live in the Reading, Newbury, Basingstoke, Bracknell or surrounding areas and need some plumbing work carried out, you can give us a call on 0118 911 3 999 or get in touch with us by using the contact form or book online. We look forward to helping you!   


Plumbers in Reading, RG1, RG30, RG31, RG6, RG4

Plumbers in Reading

Plumbers for Reading, RG1, RG30. RG2, RG6, RG31

When you require the best in affordable and reliable plumbing services in the Reading, Tilehurst, Calcot, RG30, RG1 area, look to the professionals at Reading Plumbers to get the job done well. 

999 Plumber Reading works locally to ensure a level of local expertise and customer attention that cannot be matched by other companies in the area. With convenient 24-hour service and repairs, 999 Plumber Reading will dispatch an experienced plumber in your area to provide you with outstanding service that fits your schedule and your budget.

Trying to find a dependable plumbing service can be frustrating, but 999 Plumber Reading is backed by hoards of satisfied customers in the RG1, RG30 postcode and surrounding areas that can attest to the high level of service and professionalism they’ve experienced. 

999 Plumber Reading always puts the customer’s needs at the forefront, which equates to less stress for you and your family when you encounter a plumbing issue or emergency situation that requires immediate attention.

999 Plumber Reading is equipped to address any plumbing, heating or drainage issue with an emphasis on service and quality. 

When you ring 999 Plumber Reading, a plumbing expert in your area will arrive armed with all of the tools needed to handle the job on the first visit, so you won’t have to spend any more time dealing with plumbing problems. 

Even in emergency situations, our plumbers will always come prepared to finish the job, so you can put the issues behind you!

Trace and access Plumber in Reading

999 Plumber Specialise in "Trace and Access in Reading" also known as "finding the cause of water leaks" and insurance claims from the first sign of a drip right through to identifying and repairing the cause. 

We undertake investigations into leaks in walls, under the floor, inside ceilings, behind water tanks, and leaks around water cylinders both vented and unvented using high tech water detection equipment.

Locating a leak can be a tricky task and requires expert knowledge, to find the source of some leaks can be a confusing task as water travels around and can show up some distance from the actual cause, especially under the concrete slab of your home, That's why it is recommend by experts and insurance companies that you call in an experienced plumbing company with knowledge in "trace and access" 

We also help with the step by step process to ensure you are covered by your insurance before we commence work and make sure all the damage caused is put right in quick time.

If you have a leak and need help finding the source, call 999 Plumber Trace and Access team now 0118 911 3 999 

With an exclusive focus on the area of Reading, Tilehurst, Calcot, RG1, RG30, local customers can rely on rapid response times and convenient services, day or night. 

Don’t let plumbing emergencies get the best of you! arm yourself with 999 Plumber Reading and make the best decision when it comes to correcting plumbing issues and minimising damage, all in accordance with your local water and waste regulations. 

The professionals employed by 999 Plumber Reading are also equipped with rich knowledge of the local area, which puts their service in a category all its own. 

Trust 999 Plumber Reading and never doubt that you are receiving the highest level of service in the Reading, tilehurst, Calcot, RG1, RG30 area!

With a full guarantee on each and every service it provides, Reading Plumbers stands behind its repairs so that you, the customer, never have to worry if an unexpected issue arises. 

999 Plumber Reading is dedicated to providing the best quality professional plumbing services in the Reading, Tilehurst, Calcot, RG1, RG30 area, and that includes taking full responsibility for an inadequate repair, if it were to occur.

Experience each of the benefits of 999 Plumber Reading for yourself and trust all of your plumbing, heating and drainage needs to the top local professionals. 

You’ll be in good hands any time trouble arises with 999 Plumber Reading, The best plumbing services in the Reading, Tilehurst, Lower early, RG30 , RG31,, RG1, RG6, area!

Call Now 0118 911 3 999

Boiler repairs, breakdowns and installations in Reading


A broken boiler in Reading is one of the last things anyone wants to deal with.

There may be several reasons why you’re reading this. You may have had to go through many repairs on your old boiler in the past, or it’s finally decided to pack it in. Either way, if you have a broken boiler in Reading, it’s time to look at New Boiler in Reading and move onto getting it sorted. Call today speak to me for free advice 0118 911 3 999  

What’s wrong with my boiler?

To begin with, you need to work out why you have a broken boiler. If you do this first, you may be able to save spending money on an entire boiler replacement.    

Reset your boiler

The classic ‘turn it off and on again’ technique is a classic for a reason. Regardless of the brand, if your boiler is more than 15 years old, there won’t be a reset function. Instead, you’ll have to rely on the pilot light. If this is the case, then your best option would be to consult the instruction manual. However, many manufacturers for these boilers no longer operate, so you may wind up having to get a Boiler quotation for a replacement instead. If you have a condensing boiler however, then the reset function will be a lot easier. Just look through the manufacturer’s instruction manual and it should tell you how to reset your boiler.    

Problems with your thermostat

Hopefully your thermostat won’t be THIS old! What may seem like a broken boiler, sometimes turns out to be nothing more than a simple correctable error on the thermostat. Although it depends on how you’ve programmed the settings for your boiler, there’s always a chance that the temperature has been set too low. If this is the case and your thermostat has been set lower than 21 degrees, you can relax – it’s a straightforward process to fix. All you need to do is turn the temperature from the thermostat back up to above 21 degrees and your boiler should start working again. If it doesn’t, then it might be time to speak to an industry expert for advice or to consider a boiler replacement.    

Have you had a powercut recently?

When your property suffers from a powercut, there’s a high likelihood that your boiler was one of the many items in your property that automatically got reset. If this happens, you simply need to reprogram your boiler to the preferences you had set before. If you don’t have access to your boiler’s instructional manual, you should also be able to find an answer from your manufacturer’s customer support line.    

Check your boiler’s pressure

With an issue such as this, all you need to do is check the pressure that is usually positioned at the front of the boiler. When looking at the pressure gauge, check where the needle is pointing. If it’s sitting below 1 bar, then it’s highly likely it’s the reason your boiler is failing.  However, if you find that you’re doing this repeatedly, the low pressure issue may be caused by something else. For example, it could be a leak that you haven’t come across yet. If this is the case, then check all your radiators and your boiler for leaks.    

Frozen Condensate Pipe

A condensate pipe at this angle is more likely to be frozen Although there’s an easy way to combat this issue, a frozen condensate pipe can still catch people off guard – especially as we move closer into winter.The primary function of a condensate pipe is to transfer the water that gets produced from the boiler’s condensing process (which is acidic) out of the property and through a safe exit via the external drain. The pipe itself might be frozen because the fall isn’t steep enough. If the condensate that travels out the pipe isn’t able to exit because of this poor angle, it’s going stay in the pipe until it freezes, causing you more issues.    

You don’t have a gas supply available

If your gas supply is provided on a pre-pay meter, it’s always worth checking to see if you still have credit. One of the best ways to check that you have gas available in your property, is by checking the other appliances such as the cooker hob. If you don’t have any luck with your appliances, then it’s likely an indication that you don’t have any credit. All it takes for a quick fix is to top it up or call your local gas supplier.    

Poisoning by Carbon Monoxide

When it comes to common boiler problems or having a broken boiler, most issues need to be addressed immediately in the interest of safety. This is no different for checking for gas leaks. If a broken boiler is left unchecked, it can cause damage not only to your boiler or entire central heating system, but also you and other residents in the property as well. If you ever suspect you have a gas leak, call the Gas Emergency Services immediately. 

They’ll be able to send an engineer round to your house and take the appropriate action from there. According to the NHS, there are around 25 deaths per year as a direct result of carbon monoxide poisoning in England and Wales. One of the more dangerous sides to this issue, is that carbon monoxide poisoning from an old or broken boiler is very hard to detect.There are however, some symptoms that you can always watch out for:Vomiting and feeling nauseous (sick)    

  • Lack of stability, heavy-headed
  • Pains in your abdominal region (stomach)
  • Breathing is shortened and difficult
  • Feelings of confusion and exhaustion

There may be a chance of experiencing any one of these symptoms as a result of a gas leak. Even if it turns out to be the case instead of a broken boiler, you need to contact the safety and emergency line as soon as possible.    


Boiler Brand Error Codes

No matter the brand you’ve chosen as a replacement for your broken boiler, it’s always worth knowing how to respond if anything comes up in the future. Whatever the case for your boiler not working – understanding the meaning behind each error code is going to give you a big head start in getting the problem solved.To learn about the meaning of each boiler brand’s error code, simply click on any of the links below:    

How do I know if my boiler is broken?

If you’re ever unsure, or if you simply want to know signs your boiler may be broken, there are just a couple of things to look out for:    

Boiler Kettling

The term ‘boiler kettling’ specifically refers to loud hissing or whistling sounds that you might sometimes hear from your broken boiler. The main reason for this will be because your boiler is suffering from a build up of limescale. When limescale starts building in your system, it can accumulate in a few areas, most notably your Boilers heat exchanger, When this occurs the flow of water gets restricted, which is what results in the sounds that you hear.It may seem like a whistling or clunking sound from your boiler is an easy thing to ignore, but if you hear anything like this, you need to respond as soon as possible. This is because the boiling and expansion process that occurs can cause irreparable damage to the internal components of your boiler.  


Constantly rising energy bills

You might find over time that your bills for energy usage slowly start to creep up. A common cause for this is the age and condition of your boiler, because as time passes, its efficiency will deteriorate. If your boiler is more than 15 years old, then it will be a non-condensing boiler. This means that its normal efficiency level will by definition, already be lower than a condensing boiler. As a result, your energy bills will be higher.    

Should I get a new boiler or boiler repair?

Put some thought into it!Boiler manufacturers have advanced the development of these products to impressive levels, so a new boiler won’t be cheap – to begin with. If your boiler is barely 5 years old, it’s probably not worth replacing – unless it came from a low-quality, amateur manufacturer.However, if you find that repairs are noticeably frequent and costing you a lot of money, then replacing and old boiler with a combi will be worth considering as well as a few other options. “According to the Energy Saving Trust, if you convert to an A-rated combi boiler, you can save up to 40% on your annual energy bills.” An old boiler’s efficiency can drop at alarming rates, meaning for every £100 you put towards your energy bills, you could be wasting as much as £50 because of the condition of your current boiler – scary!    

Want to get a new boiler in Reading? Get a quote!

Whether you’ve made the decision to get a new boiler replacement Reading, or you’re simply curious with your research and have a few questions, the best thing you can do is get a quote for a new boiler to know exactly what would be included in the installation.If you have any specific requirements, you can always speak to an expert during this process who will be happy to discuss with you.

999 Plumber, gas safe boiler installation in Reading Call today for a free visit, no obligation quote. 24hrs 0118 911 3 999     


Plumbers in Reading Blog

Welcome to our blog, helpful tips on plumbing, heating and general maintenance issues, We're happy to help with any of the subjects 0118 911 3 999

999 Plumber Reading